High temperature tubing from Ø0.6 to 50.8 mm, from -200°C to 260° C

• Viton 2:1 – aviation maintenance. During a retrofit on a light aircraft, cables close to the engine compartment had to be protected against oil projections and thermal peaks. The tubing Viton Ø9.5/4.8 mm was chosen to cover sensitive connections. The result is a perfect fit throughout the season, without cracking or losing grip, while the flight conditions combined heat, vibration and hydrocarbons.
• PTFE 4:1 – high temperature maintenance in the chemical environment. On a solvent production line, a sensor cable exposed to high temperatures and corrosive products had to be permanently protected. The tubing PTFE 4:1 was imposed as a solution: its high thermal hold (up to 260 °C) and its exceptional solvent resistance ensured reliable protection without altering the installation. Its 4:1 ratio made it easier to dress the moulded connector at the end of the line. After laying hot air gun, the tubing formed a homogeneous, supple and inert coat, guaranteeing the durability of the connection in an aggressive environment.
• Kynar 2:1 – embedded electronics in saline environments. As part of the autonomous marine drone equipment, the on-board electronics internal connectors were to be insulated while resistant to salt moisture. The choice was based on a tubing in Kynar 2:1, light, thin and resistant to abrasion. Placed on flexible sheets near microcontrollers, it ensured reliable insulation without congestion. Its up to 175 °C also provided a good thermal hold in the nacelle exposed to the sun. This solution protected sensitive connections without weighing up the structure, with excellent electromagnetic compatibility.

These tubings are distinguished by their wall thin, which retains the flexibility of the beams even after tightened. They provide reliable electrical insulation, excellent chemical resistance and increased service life, including in harsh environments.

They comply with the RoHS guidelines. Packing is forced either by reeleither in the bar of 1.22m. The colours vary according to the material: PTFE is often translucent white, the natural transparent Kynar, the black Viton.

True to its values, ACLP wants to highlight Made in Europe. Thus, the PTFE ratio 4:1 is manufactured in Europe. It is a plus, but it is above all a very qualitative product, conforming to the standards in force in the same way as Far East productions.

Subcategory Wall tubings thin high temperature represents the high-end thermoretractable offer. It is intended for professionals in the aviation, rail, petrochemical, military or R&D sectors, who require performance that is inaccessible to conventional polyolefins.

Choosing these tubings means investing in a solution that is sustainable, resistant and perfectly suited to environments where safety and reliability are non-negotiable.