Connectors Electrical crimping pliers, manual or automatic

During an electrical renovation in a building, a technician had to extend several single-brain copper power cables. Instead of replacing the entire length, he used sleeves to crimp. After denuding of the wires and insertion into the sleeve, each bond was set with a calibrated clamp. Then all the connections were covered with a thin-wall heat shrink tubing retracted by means of hot air gun. The result was checked at the ohmmeter : contact resistance was negligible, evidence of good conductivity. This method enabled the table to be put back into service quickly, without heavy work.

To ensure reliable crimping, it is essential to :

• choose a sleeve adapted to the cable section,
• use a clamp crimp approved, which applies the necessary pressure,
• check that the wires are well inserted until the stop before crushing,
• visually check the crash, which must be uniform and without cracking the sleeve or cut off of sleeve heat shrinkable.

Defective crimping leads to serious risks : heating, loss of contact, even fire. Therefore, the quality of the tooling and the rigour of the gesture remain paramount.

In a packaging plant, a production line was shut down due to a defect on an engine power cable from a conveyor. Maintenance electrician quickly intervened with a clamp crimp Multistation. After identifying the driver section (6 mm2), he inserted a crimp sleeve Of tinned copper, set the connection with the suitable clamp, then isolated the assembly with a medium-wall heat shrink tubing. This repair was carried out without major interruption of the process, allowing a quick resumption of the line and avoiding costly prolonged stops.

An individual passionate about vanlife has renovated himself the electrical installation of his equipped van. He used a pliers crimp manual to connect multi-brain wires from the auxiliary battery to a 12V converter. After sliding the cables into sleeves to crimp 2.5 mm2, he applied a straight pressure with his ratchet clamp, ensuring reliable contact. Each junction was then protected with a heat shrinkable tubing to ensure insulation and avoid disconnections during vibrations on the road. This simple, seamless system has allowed a clean and durable installation, even in a small space.

The sleeves to crimp are a simple and proven solution for connecting electric conductors. Consisting of a copper tube tinned with crimp surrounded by a sleeve heat shrinkableThese products have their full place in the large family of heat-retractable products.

The sleeves to crimp their reliability and ease of use in the field. Whether it's extending a building cable, repairing an industry line or making a temporary maintenance junction, they offer a safe alternative to heavier methods. To implement these sleeves crimp, ACLP offers you for the sale of pliers crimp.