Cable tie of width from 2.5 to 13mm, length 100 to 1020mm

In one individual, the space behind the TV and computer cabinet was in disorder, with many intertwined cables. There was a risk of this dung of sons : difficulty in cleaning, risk of tearing a cable by misguided pulling, and aesthetics poorly cared. In a few gestures, our handyman used several nylon collars (plastic cable clamps) to assemble the cables by beam and attach them along the foot of the cabinet. The result is immediate : the cables are kept in place, the ground is clear and the risk of damaging an accident connection is eliminated. This example shows the daily utility of clamps : even in the house, they provide a simple solution to secure and order installations and equipment.

There are a wide variety of clamps, each suitable for specific uses :

Cable tie Plastic (nylon self-locking) : This collar, often called a cable clamp, is a plastic band (usually made of polyamide 6.6) with an integrated ratchet system. Once inserted into its loop, the collar locks and can no longer loosen. It is used to attach or group various elements (electric cables, flexible tubes, bags, tarpaulins...) and is resistant to temperature variations, oils, fats and solvents. Available in different sizes, and often in black (UV resistant) or natural colours, this lightweight and economical necklace is easy to use and is essential in any toolbox.

Spring collar : This spring steel model is presented as an open ring with overlapped ends. To put it in place, the ends are spread (usually by means of a clamp) in order to slide it around the hose, then release. The spring tension ensures constant tightening. This type of collar is ideal for vehicle hoses, for example, as it makes it possible to compensate for variations in diameter due to the expansions and contractions of the hose (heat, vibration) while maintaining the pressure.

Endless screw collar (Groans) : This is the most widespread metal necklace. It consists of a steel strip with pins or perforations and a small screw housed in a housing at one end. By turning the screw (with a screwdriver or key), the tape is pushed on itself, which tightens the collar around the hose. This type of collar is commonly used for low pressure hydraulic or pneumatic connections (fuel connections, water circuits, air circuits, etc.). There are reinforced variants such as the turret collar (with a full band and a more robust screw), or models with a grooved or grooved strip offering more homogeneous clamping on specific applications. The standard screw collar, often called Serflex, remains a versatile choice for a multitude of uses thanks to its ease of implementation and efficiency.

Earrings : This metal collar is equipped with one or two "ears" (flat loops) that act as a clamping point. Once the collar is positioned, you come to pinch the ear with a special clamp to deform the metal and get a permanent clamp. This system, which is frequently used in pneumatic and hydraulic circuits (e.g. on compressed air pipes, petrol circuits or on small rubber pipes), offers reliable screw-free clamping and a smooth profile (low congestion once in place). However, it is for single use only : Once the ear is pinched, the collar must be cut to remove it.

Each type of cable tie therefore has advantages depending on the situation. The choice will depend on the nature of the components to be assembled (flexible or rigid), the pressure or force exerted, and the constraints of the environment.

Not all clamps are valid, and the source/manufacture can greatly influence the quality of the product. Many entry-level necklaces are produced in very large series in Asia, with sometimes less resistant materials or more random quality controls. On the other hand, European manufacturing generally ensures a more consistent quality through strict production standards and rigorous monitoring. By manufacturing locally, quality can be monitored at each stage of the production process, reducing the risk of defects or non-compliance.

In concrete terms, opting for a collar made in Europe often means better long-term reliability : For example, a plastic that will not break after a few months outside, or a steel whose surface treatment will prevent corrosion for years. European manufacturers also have an obligation to comply with health and environmental standards (absence of toxic substances such as certain phthalates, REACH compliance, etc.), which is a guarantee of safety for the end user.

That's why ACLP has chosen to distribute cable clamps made in Europe. By choosing these products, the customers of ACLP enjoy a superior and regular quality, with the peace of mind to have a cable tie performance, durability and compliance with standards. Even though the cost of buying can be a little higher than that of low-end Asian products, the investment is profitable by the longevity and efficiency of the collar, which will avoid frequent replacements or incidents due to breakage.

Use of cable tie is in itself quite simple and generally does not require complex tooling : for a screw collar, a screwdriver or a key is enough to tighten it, and a nylon collar can often be hand-knit and then cut with a cutter. However, in a professional context or to facilitate work when there are many attachments to be made, specific tools exist to increase efficiency and accuracy. In addition, these ergonomic tools will prevent musculoskeletal disorders such as tendinitis.

For plastic collars (cable clamps), a special clamp is often used, also known as a clamp. Cable clamp gun. This tool tightens the nylon collar correctly and cuts with a single gesture the excess tab once the sufficient clamping is reached. The result is an optimal, constant clamping from one collar to the other, and a clean cut without a glittering part (which improves safety by avoiding plastic tips that exceed and could scratch). This type of clamp is highly appreciated by electricians, for example, when they attach many bundles of cables in an electric cabinet or along cable paths.

For metal collars (including ear or spring collars used in automobiles), there are also suitable clamps. An ear clip will allow to effectively pinch the ear of the necklace for the crimp without effort, ensuring uniform and safe clamping. Similarly, a spring collar clamp (sometimes with flexible cable to reach difficult access locations in the engine compartment) will facilitate the compression of the collar when removing or installing it, where the strength of the fingers is insufficient. These specific tools are not mandatory for occasional use, but they provide valuable services by ensuring easier, faster and safer mounting of clamps.

Of course, the implementation of cable tie is not the same as the heat shrinkable tubing, but one of the purposes of both products is to assemble cables, tighten, secure. The clamps are complementary to the range of heat-retractable ducts.

Whether for advanced industrial applications or for everyday DIY, the cable tie has been imposed as an essential fixing solution thanks to its simplicity, versatility and efficiency. However, it should be chosen wisely and quality should be given priority to avoid bad surprises. From the small discreet nylon cable clamp to the robust metal collar for large durites, each project will find its ideal necklace. ACLP is at your disposal to accompany you in this choice : Don't hesitate to contact our experts, who will advise you the most suitable European cable clamp for your needs and make you enjoy the benefits of a reliable and durable product.